Friday 20 July 2012

Peasants and Pilgrims, Crusader Miniatures

In perhaps the least glamorous start to any start to a brand new project these peasant figures are the first ones painted to take part in my adaptation of the Cry Havoc/Siege board game.

After buying several packs of knights and men-at-arms miniatures I noticed that the first scenario in Cry Havoc actually involves the humble peasants, hence these figures from the 'Peasants and Pilgrims' (pack ref. MCF032 - from the late Crusades range by Crusader Miniatures) are the first figures to be posted.

The box contains eight miniatures made up of four sets of identical twins. As regular readers will know, I'll find any excuse to modify figures so I got work with a scalpel and greenstuff . The results as shown below.
Original figures

Modified figures
Originals are on the right, the modified versions on the left.


As medieval weapons were often developed from agricultural equipment I looked at the spearman and thought it would be relatively easy to convert the spear into a flail (the bill is another classic example of this form of adaption). I cut off the spearhead and superglued a small length of chain to the end, then I fixed a small length of plastic sprue to the end of the loose chain. I would strongly recommend using decent sets of tweezers for this fiddly job unless you want to glue yourself to the figure (which is precisely what I did, as per usual).



The cowls were added using greenstuff, a thin strip was wrapped round the head and then pushed and pulled into place using a metal scribe.

The small round wooden shield (targe or buckler - delete was appropriate), was taken from the Perry's plastic WoTR box set.





I forgot to take a picture of the backs of these figures so you'll have to trust me when I say I added a large leather bag to the figure on the left. It was made with just two balls of greenstuff stuck into position and then poked with a metal scribe to give the effect of creases and folds. The bag now looks too large but the greenstuff had set by the time I'd changed my mind so I left it as it was.

7 comments:

  1. What a cracking start to the new project. I'm loving the little conversions; a great way to double the variety in the set.

    ReplyDelete
  2. Are these compatible with the Perry WOTR figures, Matt?

    ReplyDelete
  3. These look fantastic! I struggle with conversions, and this is a nice little dose of inspiration. I'm looking forward to seeing more about the new project!

    ~ Jonathan

    ReplyDelete
  4. Thanks for the comments. Glad you like the figures, more to come next week.

    @Arjun, I'll have a look at the Perry figures over the weekend and take a comparison shot for you.

    Matt

    ReplyDelete
  5. Very very nice blog and miniatures Sir!
    Thanks for sharing
    Regards
    derFigurenschieber

    ReplyDelete
  6. Very nice work!! Crusader miniatures are both nice figures and nice to paint.

    Christopher

    ReplyDelete
  7. Excellent start to a new project. Always nice to see a few conversions in armies

    ReplyDelete